Price
7.88€Available Sold and shipped by: RESILIENZA LUXEMBOURG SÀRL-S
tube of lubricating grease 7.1 mhr grease gr.40
Code: 7615375bDescription
MALOSSI 7.1 MHR GREASE
Semi-synthetic high performance grease with a lithium complex soap thickener.
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C.
Description
MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half pulley bushing resulting in extended maintenance intervals.
MALOSSI 7.1 MHR GREASE is a high performance grease which combines mineral and synthetic oils, lithium complex soap thickener and anti-corrosion, anti-rust, anti-wear, and E.P. additives. The chemical composition of this grease produces superior anti-corrosion and thermal/mechanical stress resistant properties, even at extreme operating conditions.
Specifications and Approvals
Meets or exceeds the following industry specifications :
- ISO 6743-9 L-XCCEB 2/1
- DIN 51502 KP 2/1 P –30
Features and Benefits
- Excellent protection against rust and corrosion and resistance to water wash out.
- Elevated dropping point.
- Excellent pumpability.
- Extended lubrication intervals translating into reduced operational costs.
- Compelling anti-corrosive characteristics of lubricated parts.
Typical Properties
| Properties | U. M. | Values | Standard |
| NLGI Grade | 2 | DIN 51818 | |
| Texture | Smooth, Buttery | Visual | |
| Colour | Light brown | Visual | |
| Penetration-worked | mm/10 |
280 / 310 |
DIN ISO 2137 |
| Dropping Point | °C | > 250 | IP 396 / 93 |
| Steel corrosion protection (EMCOR Test /3% NaCl) | Grade |
0 - 0 2 - 2 |
DIN 51802 |
| Copper corrosion protection, 24 hrs @ 140°C | Grade | < 2 | DIN 51811 |
| Oil separation, one week @ 40°C | % | 1 - 3 | DIN 51817 |
| Water resistance @ 90°C | Grade | 1 - 90 | DIN 51807 - 1 |
| Operational temperature range | °C | -30 / +160 | DIN 52825 |
| Oxidation Stability | bar | < 0,5 | DIN 51808 |
| Base oil type | Mineral Oil / PAO | ||
| Base oil viscosity, mm2/s |
40°C 100°C |
2800 22 |
DIN 51562 - 1 |
** MALOSSI 7.1 MHR GREASE is recognizable from the BLACK cap.. **
Applies to
Download
tube of lubricating grease 7.1 mhr grease gr.40
7.88€
What type of oil are you searching for?
Check your vehicle's maintenance manual and if you're not sure...
Go to the oil finder